Woca Pre-Colour

Wood stain for pre-treating any type of wood; available
in White, Grey, and Black, for individual wood colors.

2.5L White
Stock
SFr. 134.25
neu SFr. 120.83
2.5L Grey
Stock
SFr. 134.25
neu SFr. 120.83
2.5L Black
Stock
SFr. 134.25
neu SFr. 120.83
2.5L Brown
Stock
SFr. 134.25
neu SFr. 120.83
1L Red
Stock
SFr. 44.80
neu SFr. 40.32
1L Green
Stock
SFr. 44.80
neu SFr. 40.32




Description

WOCA Pre-Colour

WOCA Pre-Colour is a water-based stain for pre-treating bare wood. Pre-Colour colors wood without covering up its natural structure.

Using Woca Pre-Colour White also gives light-colored woods additional protection against yellowing. Woca Pre-Colour is also suited for use on children's toys and Kitchen counters, as it the standards for healthy living.

Pre-Colour White   Pre-Colour Black   Pre-Colour Grey   Pre-Colour White
Pre-Colour White   Pre-Colour Black   Pre-Colour Grey   Pre-Colour White
Pre-Colour Black   Pre-Colour Yellow   Pre-Colour Blue   Pre-Colour Green
Pre-Colour Black   Pre-Colour Yellow   Pre-Colour Blue   Pre-Colour Green


Also available inother colors upon request

Wood type from top left to right:
spruce, spruce, oak, oak, oak. The images are only illustrations for treated wood shades; it is possible that colors may differ from this sample.


Product Info

Any wood can be treated using WOCA Pre-Colour, but due to its excellent structural qualities, oak is best suited for it. We always recommend testing on a sample beforehand.

The bare wood first needs to be washed with Wood Cleaner, which opens up the pores in the wood, allowing it to absorb the pigments in the Pre-Colour treatment more consistently.

Coverage: 8-10 m2 for each liter of WOCA Pre-Colour. If Pre-Colour Black is used, this requires the wood to later be finished with Maintenance Paste Natural.

Drying time is approx. 8 hours, assuming an average room temperature of 20° Celsius. Afterwards, use the beige pad to flatten out minor irregularities and smooth over open pores in the wood. After intermediate sanding, thoroughly clean the wood floor with a vacuum cleaner. Next comes the basic treatment with oil.

Using an oil applicator with sheepskin ensures an even, full application of the stain. Edges and corners should not be treated using a paint brush, but by cutting off a piece of sheepskin and using that. We recommend using tape to cover the walls before applying WOCA Pre-Colour stain. Tools used may be cleaned with water.

Items needed:
applicator bar, telescopic extension pole, vacuum cleaner, gloves, sheepskin, beige pads 2x, cleaning bucket

WOCA Pre-Colour Application